Buying Tires

Tires, by nature, wear out over time. Due to the large number of factors involved (such
as speed, road conditions, inflation, vehicle maintenance, your driving habits,
temperature), it is impossible to predict a firm figure for expected tread life. Tires
should be inspected regularly and replaced when the tire is worn down.

1. Checking for Wear

Tires are worn out when there is just 1.6-mm (2/32-inch) tread depth remaining. This
can be measured with an inexpensive tread depth gauge, available at most auto supply
stores. In the absence of a gauge, here are two quick methods to check to see if your
tires are worn down to the point of replacement.


A. The Tire Wear Bars

Tires are manufactured with “wear bars” (see Figure 1) that indicate when there is less
than 1.6 mm (2/32 inch) of tread depth remaining. When the tread is worn down to
the point that the wear bars are flush with the tread, the tire must be replaced.

B. The Penny Test

The Rubber Association of Canada suggests this simple test to measure the tread depth
on your tires. Place a penny into a tread groove with the Queen’s head down and
facing you. If you can see the tips of the crown, it’s time for a new tire.

2. Understand Your Tire Needs

Tires are manufactured in an overwhelming array of types and designs. Getting the
best combination of value and performance is a result of clearly understanding your
own vehicle and driving needs, and being able to communicate them to a tire
professional who can assist with the final selection.

There are many tire attributes to consider when buying tires. No one tire satisfies
everyone’s driving needs, so it is important to consider the factors important to you,
and be able to relate them to a tire professional, who can help select a tire that most
meets your combination of requirements.

To help in the selection, a tire professional will often ask a series of “qualifying”
questions, similar to the following. The combination of responses will help determine
the best tire for your needs.

A. How Did Your Current Set of Tires Perform?

Compare your current tires with the following set of most commonly requested
attributes. Which attributes would you like more of? Which are not as important? This
will give you a great baseline for selecting your next set.


Tire Attributes
`
1. Durability (Long Tire Life): Depending on a large variety of factors, passenger
tires may last from less than 40 000 km to more than 140 000 km. High
durability may be of importance to drivers who drive 50 000–60 000 km per year,
but far less so to a driver who travels just 10 000 per year. All Season tires may
be more durable than Winter tires or some Performance tires. Summer tires may
also have more durability on harsher road surfaces.

2. Traction: The road and weather conditions you most commonly drive in will
greatly influence your traction needs. All Season tires work well in most average
conditions; however, Performance (generally “H” speed rated and higher) tires
offer better “handling” and cornering traction, although often sacrificing ride
comfort. Winter tires are clearly the best choice for stopping and cornering in
winter conditions, but may not be as durable or quiet as All Season or Summer
designs.

3. Ride Comfort and Noise Levels: Some drivers prefer a very “plush” quiet ride,
which is generally available in many “H” and lower speed rated Summer and All
Season tires. The better traction provided by Winter or Performance tires usually
offsets some of this luxury feel.

4. Fuel Efficiency: Some manufacturers offer Low Resistance tires, which provide as
much as a 20 percent reduction in rolling resistance, increasing fuel economy by
approximately 4 percent and reducing exhaust emissions. Generally this attribute
is available in higher quality All Season tires, but not in Winter or Performance
tires.

5. Appearance: Some drivers are quite happy with “round and black,” provided that
the overall value they seek is there. Others may want the unique appearance of
whitewall, white-lettered or lower aspect ratio tires.

6. Extended Mobility: Usually referred to as “run flat,” these tires have strong
appeal to drivers who want, or need, the security of knowing they will not have
to stop on the roadside to change a tire. These tires may be available in All
Season, Winter or even some Performance tire designs.

From an energy efficiency point of view, the most desirable attributes of a replacement
tire are low rolling resistance and long tire life. Low rolling resistance reduces fuel
consumption, and long tire life reduces the amount of used tires sent to land fills or
recycling centres.


B. Do You Need a Passenger or Light Truck Tire?

Determine the category of tire you need. The majority of car owners and many pickup
and SUV owners will be well served by a Passenger designation tire. Some pickup and
SUV owners, however, will need the more robust characteristics of a Light Truck (LT)
tire for towing or carrying heavier loads or working in rough conditions. Many drivers
also prefer the look of LT tires. (Larger, more aggressive treads and a stronger,
“beefier” appearance.) However, they may come with a higher rolling resistance that
means a higher fuel penalty.


C. What Kind of Driving Do You Do?

Think about the kind of driving you do. (Your current set of tires may not be suited to
your conditions.) Do you commute long distances? (Consider durability, fuel efficiency
and ride comfort.) Do you mostly take short trips around town? (Durability may not be
as important as ride comfort or fuel efficiency.) Are you almost always on pavement, or
do dirt and gravel roads comprise part of your drive? (If you encounter wet or winter
conditions, traction may be more important than ride comfort or durability.) The
combinations are endless, but knowing what is important to you will steer you toward
an informed buying decision.


D. What Tire Size Is on Your Vehicle?

Be sure to buy the right tire size for your vehicle. The most appropriate size can be
found on the tire information placard found on the driver’s doorpost, or on the glove
box, trunk or fuel door. The correct size is also listed in the owner’s manual. It is
important to get the appropriate size, speed rating and load capacity for your vehicle. If
in doubt, be sure to ask a tire professional for guidance.

Performance oriented drivers may want to alter the appearance of their vehicle, or
improve steering and handling response of their vehicles by changing tire size, or tire
and wheel combination sizes. For many vehicles, this is possible through the use of a
process called “plus sizing.” Plus sizing is a process tire professionals use to fit larger
(diameter and width) tires or tire and wheel combinations on vehicles

Use Caution When Mixing Tires

Replacement tires should be as near as possible to the original equipment tires.

Although it isn't necessary to buy the same brand, replacement tires should be chosen
with the aid of a tire professional to reflect the vehicle's design requirements, type of
driving expected and required tire performance. Unless the vehicle was originally
equipped with different sizes on the front and rear axles, all tires on the vehicle should
be of the same size, tread design, speed rating, load capacity and construction (i.e.
radial or non-radial). If tire mixing cannot be avoided, the following guidelines are
provided to help ensure your safety.

When Installing Two Tires Only

For best vehicle performance, it is strongly recommended that all tires be replaced at
the same time.

When it is not practical or possible to replace all four tires, the simple phrase to
remember is “Best to Back.” In order to prevent an oversteer condition, the most
stable, higher traction tires must be installed on the rear. For example:

a. The two new tires when replacing with the same size, type and service description
b. The lowest aspect ratio
c. The highest speed rating
d. When radials are mixed with bias


Caution: Winter tires should always be installed in sets of four, especially on front-
wheel-drive vehicles. Mounting two winter tires on the front only can create
severe adverse handling conditions. Damage and injury may result.